Oct 30, 2009,
MD&D News Staff
The LTC554x family of downconverting mixers from Linear Technology offers high dynamic range and cover the 700-MH to 4-GHz wireless infrastructure frequency range. They’re designed to satisfy the requirements of LTE cellular and WiMAX basestations as well as 3G CDMA, WCDMA, TD-SCDMA, UMTS, and GSM/EDGE platforms....
Oct 19, 2009,
Louis E. Frenzel, Editor in Chief
One of the trickiest parts of basestation design is the interface between the RF front end and the IF section where the ADC resides. National Semiconductor’s SP16160CH1RB IF sampling receiver subsystem addresses this problem. Designed for LTE and WiMAX basestations, it also works great in current WCDMA and GSM/EDGE systems. ...
Oct 14, 2009,
MD&D News Staff
The FDFME3N311ZT boost switch from Fairchild Semiconductor provides high efficiency for boost conversion circuits in cell phones, medical devices, and other portable and consumer applications....
Oct 9, 2009,
MD&D News Staff
The TRF2443 integrated, high-linearity, low-noise IF transceiver from Texas Instruments offers XPIC support and reduces solution costs by 40%, power consumption by 30%, and space by 40%, compared to discrete implementations....
Oct 7, 2009,
MD&D News Staff
The Analog Devices AD9122 DAC supports the high data rates and complex modulation schemes required for advanced multi-carrier wireless and broadband communications equipment throughout the world, according to the company. It meets the requirements for GSM, WCDMA, TD-SCDMA, cdma2000, WiMAX, and LTE operation....
Sep 28, 2009,
Louis E. Frenzel, Editor in Chief
The Atheros Communications AR9002WB-1NGB 11n/BT Combo solution combines Atheros’ proven WLAN and BT chips on a single Half Mini-Card with PCI Express form factor for laptops and netbooks....
Sep 25, 2009,
By Louis E. Frenzel, Editor in Chief
Fujitsu’s MB86L01A is the first multimode transceiver to eliminate the 3G TX and RX interstage SAW filters and LNAs. This design enables cell-phone manufacturers to reduce component count, board space, and BOM....
Sep 23, 2009,
MD&D News Staff
SkyCross has announced that its iMAT antenna solutions are now available in LTE frequencies. According to the company, the iMAT technology boosts the capacity, data rates, and reliability of 4G networks to help meet and exceed the industry’s high performance expectations. ...
Sep 22, 2009
The 2.5-in. Spinpoint M7 internal HDD from Samsung offers 640 Gbytes of storage. It targets high-end mobile computing applications requiring greater shock resistance without a compromise in performance....
Sep 11, 2009,
Louis E. Frenzel, Editor in Chief
Amalfi Semiconductor’s dual-band GSM/GPRS AM7802 transmit module incorporates CMOS PAs that provide greater efficiency and up to 40% more talk time than competing solutions in entry-level and ultra-low-cost handsets....
Sep 9, 2009
The Odyssey 9000 LTE chipsets from Wavesat Inc. offer CAT-3 performance of 100 Mbits/s downlink and 50 Mbits/s uplink for mobile devices including USB dongles, data cards, mobile handsets, and MIDs. According to Wavesat, this line of highly integrated SoCs provides industry-beating performance and power consumption....
Sep 3, 2009,
MD&D News Staff
Tiny, Low-Power Intersil ISL99201 And ISL99202 Audio Amps Offer High RF Immunity...
Sep 2, 2009
The OV2710 from Omnivision Technologies addresses the rapidly growing demand for affordable, HD-quality digital video cameras. This native 1080p high-definition (HD) CMOS image sensor delivers high-end video conferencing and recording for camcorders, notebooks, netbooks, and other mobile applications. ...
Sep 1, 2009,
Louis E. Frenzel, Editor in Chief
Murata’s space-saving BLM15SAX_SN advanced ferrite beads lower dc resistance up to 60% compared to previous models and provide real power savings. They also offer a dc resistance of as low as 0.02 Ω, which helps reduce power consumption in battery-powered applications. ...
Aug 24, 2009
Vishay Intertechnology has expanded its family of n-channel TrenchFET power MOSFETs in the thermally enhanced PowerPAK SC-75 package to offer a VDS range from 8 to 30 V. According to the company, these additions to the family include the industry’s first 30-V device in the 1.6- by 1.6-mm footprint area as well as a 20-V MOSFET with the industry’s lowest on resistance...