Incremental Improvements Define The 2012 Mobile World Congress |
|
![]() |
Louis E. Frenzel, Editor in Chief
The usual players all showed up at this year’s Mobile World Congress in Barcelona with lots of improved devices, but no real game-changing breakthroughs... |
Superconductor, Conductus Agree to Merger
Superconductor Technologies Inc. and Conductus Inc. jointly announced that they have signed a definitive agreement to merge the two companies....
Two-chip CMOS Dual-band Chipset for 802.11a/b/g WLAN Applications
Resonext Communications Inc. has developed the RN5220 dual-band chipset for 802.11a/b/g applications. The chipset consists of a single-chip, dual-band CMOS radio and a multiprotocol baseband/MAC chip, both manufactured on the 0.18-micron, 1.8-volt CMOS process. Based on the company’s 802.11a product, the RN5220 chipset is compliant with IEEE 802.11a/b standards, and is designed to fully support the emerging 802.11g specifications with a data transfer rate of up to 54 Mbps....
Literature
Hard metric catalog for CompactPCI applications
AVX Corp. has released its updated 2 mm hard metric connector catalog for CompactPCI applications....
Products
Aura Communications has developed the LibertyLink SOC. The device uses magnetic induction technology for short-range wireless voice and data communication....
Product Focus Fiber Optics
Agilent Technologies has announced a new series of small form factor pluggable (SFP) fiber optic transceivers for SONET/SDH networks....
Cadence Design Systems Reports Third Quarter Results
Cadence Design Systems Inc. announced third quarter pro forma diluted earnings per share of $0.15, down 30% from the third quarter of 2001 ......
Comprehending the Technology Behind the UMTS Wideband CDMA Physical Layer
The physical layer of the universal mobile telecommunications system (UMTS) wideband code-division multiple access (WCDMA) standard uses direct sequence spread spectrum (DSSS) modulation with a chip rate of 3.84 Mcps. The channel bandwidth is 5 MHz and this wider bandwidth (compared to 2G systems such as IS-95, which have a bandwidth of 1.25 MHz) has benefits such as higher data rates and improved multipath resolution....
Lamina Ceramics Opens Doors to New Facility
Lamina Ceramics has opened a new state-of-the-art manufacturing facility in Westampton, NJ to increase production of components, modules, circuit boards, and packages ......
VIA, Ericsson Announce Bluetooth Agreement
VIA Technologies Inc. announced that it has signed an agreement with Ericsson to license their Bluetooth IP....
PCTEL to Supply Maritime Telecommunications
PCTEL Inc. confirmed that it is providing its wireless access hardware and software products to the cruise line industry through its commercial agreement with Maritime Telecommunications Network....
Barcelona Design to Offer Analog IP for 90 nm Node
Barcelona Design Inc. announced its plan to develop products at the 90 nm technology node. Taiwan Semiconductor Manufacturing Co. is expected to share technology information with Barcelona to support the development of analog intellectual property (IP) engines based on TSMC's Nexsys 90 nm process technology....
Passive Integration Technology: Targeting Small, Accurate RF Parts
Mobile telephone handsets have witnessed a strong innovative drive to smaller and cheaper products with increased functionality and performance while still meeting the tight constraints for mass production within a short product life cycle. This combination of conflicting trends has been achieved by optimizing the key technical capabilities required in the development and production of each new handset generation....
First Bluetooth WCDMA (UMTS) and GSM Voice Calls
Qualcomm Inc. announced the successful completion of the world's first Bluetooth-to-WCDMA (UMTS) voice calls....
Open-collector Mixer Design for Next Generation RFICs
Many RF front-end integrated circuit (IC) devices used in today's handsets employ a differential open-collector (OC) output structure for the active mixer stage. This configuration allows the customer flexibility in setting the output impedance, conversion gain, and linearity of the mixer. These front-ends can be used effectively with both differential and single-ended surface acoustic wave (SAW) filter configurations. This article describes techniques for the design of output network circuitry...
The times they are a changin'
In the last two columns I've addressed the reborn military market. I'd like to now offer insights into how to get the money....
Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | 77 | 78 | 79 | 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97 | 98 | 99 | 100 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | 111 | 112 | 113 | 114 | 115 | 116 | 117 | 118 | 119 | 120 | 121 | 122 | 123 | 124 | 125 | 126 | 127 | 128 | 129 | 130 | 131 | 132 | 133 | 134 | 135 | 136 | 137 | 138 | 139 | 140 | 141 | 142 | 143 | 144 | 145 | 146 | 147 | 148 | 149 | 150 | 151 | 152 | 153 | 154 | 155 | 156 | 157 | 158 | 159 | 160 | 161 | 162 | 163 | 164 | 165 | 166 | 167 | 168 | 169 | 170 | 171 | 172 | 173 | 174 | 175 | 176 | 177 | 178 | 179 | 180 | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 | 190 | 191 | Next

